Author ORCID Identifier
0009-0008-0645-6523
Biosketch
I am Antony J, a Research Scholar in the School of Mechanical Engineering at SASTRA Deemed to be University, Thanjavur, Tamil Nadu, India. My research focuses on the design and development of assistive mobility devices, with particular emphasis on manually powered wheelchairs for persons with lower-limb disabilities.
My doctoral research, titled “Design and Development of a Lever-Propelled Wheelchair for Persons with Lower Limb Disability in Low-Resource Settings,” focuses on developing an innovative lever-propelled wheelchair incorporating a dual-power-stroke mechanism. The research involves mechanism design, kinematic and dynamic analysis, experimental investigation of hand forces, and optimization of design parameters, prototype development, and user evaluation.
As part of my research, I developed an experimental setup to investigate hand forces at different hand positions and designed and fabricated a functional wheelchair prototype incorporating a crank-rocker mechanism. The research also explores ergonomics, propulsion mechanisms, user satisfaction, and practical design considerations for low-resource settings.
My research interests include assistive technology, wheelchair design, mechanism development, ergonomics, human-machine interaction, experimental design, and optimization. Through my research, I aim to contribute to the development of affordable, reliable, user-friendly, and easily maintainable mobility solutions that can improve independence and quality of life for persons with disabilities.
Date of Award
10-8-2026
Document Type
Thesis
School
School of Mechanical Engineering
Programme
Ph.D.-Doctoral of Philosophy
First Advisor
Dr.M.P.Jenarthanan
Second Advisor
Prof.Anjan Kumar Dash
Keywords
Wheelchair, Assistive Technology, Lower limb Disability, Lever-Propelled Wheelchair, Rehabilitation
Abstract
For individuals with lower-limb disabilities, manual mobility devices such as push-rim wheelchairs, tricycles, and lever-propelled wheelchairs are commonly used for transportation. Among these devices, tricycles and lever-propelled wheelchairs are preferred for covering longer distances. However, conventional tricycles have front-mounted hand pedals that require users to exert force near chest level, resulting in an ergonomically uncomfortable operating position. Similarly, lever-propelled wheelchairs have a major limitation in that power is generated during only one stroke, either pushing or pulling. This research aims to overcome these limitations by developing an improved wheelchair propulsion mechanism.
Four different mechanisms for converting linear lever movement into rotary motion of the wheel crank are investigated. These mechanisms are designed to generate output force during both pushing and pulling actions. The most suitable mechanism is selected based on three criteria: maximum torque generation for a given input force, minimum number of components, and overall dimensional constraints of the wheelchair. Based on these selection criteria, the crank-rocker mechanism is identified as the most appropriate mechanism for the proposed wheelchair design.
To determine the optimal lever position for the crank-rocker mechanism-based wheelchair, an experimental test rig is developed to enable participants to apply horizontal forces, which are recorded using a Data Acquisition (DAQ) system. The corresponding shoulder and elbow joint torques are calculated using a three-degree-of-freedom (3-DOF) upper-arm robotic model. Furthermore, the Response Surface Methodology (RSM) is employed to identify the optimal lever position at which the maximum force can be generated. The findings from these investigations are subsequently incorporated into the overall wheelchair design.
Based on the proposed concepts, two prototype versions of the wheelchair are developed. Version I is evaluated using healthy participants, while Version II is tested with 25 healthy individuals and 25 individuals with lower-limb disabilities. The second prototype achieves an overall user satisfaction index of 94%. In addition, its turning radius, turning space requirements, and overturning stability are evaluated through both analytical and experimental investigations. The results demonstrate the potential of the proposed crank-rocker mechanism-based wheelchair as an ergonomically improved mobility solution for individuals with lower-limb disabilities.
Recommended Citation
J, Antony Mr, "Design and Development of Lever-Propelled Wheelchair for Person with Lower Limb Disability in a Low-Resource Settings" (2026). Theses and Dissertations. 237.
https://knowledgeconnect.sastra.edu/theses/237